Abhi PYQ

6th Semester Syllabus

Electrical & Electronics Engineering

Credits Table

Course Title L T P Credits
Digital Signal Processing [100606] 3 0 0 3
Introduction to VLSI Design [100607] 3 0 0 3
Professional Skill Development [100608] 3 0 0 3
Measurements and Instrumentation [110601] 3 0 0 3
Program Elective-I [1106XX] 3 0 0 3
Program Elective-II [1106XX] 3 0 0 3
Digital Signal Processing Lab [100606P] 0 0 2 1
Introduction to VLSI Design Lab [100607P] 0 0 2 1
Electronics Design Laboratory [100609P] 0 0 4 2
Measurements and Instrumentation Lab [110601P] 0 0 2 1
TOTAL 25

Theory Subjects

Lab Subjects

Digital Signal Processing [100606]

  • Unit 1.0: Discrete-time Signals and Systems
    • Discrete Time Signals and Systems Sequences
    • Representation Of Signals On Orthogonal Basis
    • Representation Of Discrete Systems Using Difference Equations
    • Sampling And Reconstruction Of Signals Aliasing
    • Sampling Theorem And Nyquist Rate
  • Unit 2.0: Z-transform
    • Z-Transform
    • Region Of Convergence
    • Analysis Of Linear Shift Invariant Systems Using Z-Transform
    • Properties Of Z-Transform For Causal Signals
    • Interpretation Of Stability In Z-Domain
    • Inverse Z-Transforms
  • Unit 3.0: Discrete Fourier Transform
    • Frequency Domain Analysis
    • Discrete Fourier Transform (Dft)
    • Properties Of Dft
    • Convolution Of Signals
    • Fast Fourier Transform Algorithm
    • Parsevals Identity
    • Implementation Of Discrete Time Systems
  • Unit 4.0: Design of Digital Filters
    • Design Of Fir Digital Filters Window Method
    • Park-Mcclellans Method
    • Design Of Iir Digital Filters Butterworth
    • Chebyshev And Elliptic Approximations
    • Low-pass
    • Band-pass
    • Band-stop And Highpass Filters
  • Unit 5.0: Finite Register Length and Spectral Estimation
    • Effect Of Finite Register Length In Fir Filter Design
    • Parametric And Non-parametric Spectral Estimation
    • Introduction To Multi-rate Signal Processing
  • Unit 6.0: Applications of Digital Signal Processing
    • Correlation Functions And Power Spectra
    • Stationary Processes
    • Optimal Filtering Using Arma Model
    • Linear Mean-square Estimation
    • Wiener Filter

Text/Reference Books:

  1. S. K. Mitra, “Digital Signal Processing: A computer based approach”, McGraw Hill, 2011.
  2. A.V. Oppenheim and R. W. Schafer, “Discrete Time Signal Processing”, Prentice Hall, 1989.
  3. J. G. Proakis and D.G. Manolakis, “Digital Signal Processing: Principles, Algorithms and Applications”, Prentice Hall, 1997.
  4. L. R. Rabiner and B. Gold, “Theory and Application of Digital Signal Processing”, Prentice Hall, 1992.
  5. J. R. Johnson, “Introduction to Digital Signal Processing”, Prentice Hall, 1992.
  6. D. J. DeFatta, J. G. Lucas and W. S. Hodgkiss, “Digital Signal Processing”, John Wiley & Sons, 1988.

Introduction to VLSI Design [100607]

  • Unit 1.0: MOSFET Fundamentals
    • Introduction Mosfet
    • Threshold Voltage
    • Current
    • Channel Length Modulation
    • Body Bias Effect And Short Channel Effects
    • Mos Switch
    • Mosfet Capacitances
    • Mosfet Models For Calculation Transistors And Layout
    • Cmos Layout Elements
    • Parasitics
    • Wires And Vias Design Rules Layout Design
    • Spice Simulation Of Mosfet I-v Characteristics And Parameter Extraction
  • Unit 2.0: CMOS Inverter
    • Cmos Inverter
    • Static Characteristics
    • Noise Margin
    • Effect Of Process Variation
    • Supply Scaling
    • Dynamic Characteristics
    • Inverter Design For A Given Vtc And Speed
    • Effect Of Input Rise Time And Fall Time
    • Static And Dynamic Power Dissipation
    • Energy & Power Delay Product
    • Sizing Chain Of Inverters
    • Latch Up Effect
    • Simulation Of Static And Dynamic Characteristics
    • Layout
    • Post Layout Simulation
  • Unit 3.0: Static CMOS Design
    • Static Cmos Design
    • Complementary Cmos
    • Static Properties
    • Propagation Delay
    • Elmore Delay Model
    • Power Consumption
    • Low Power Design Techniques
    • Logical Effort For Transistor Sizing
    • Ratioed Logic
  • Unit 4.0: Logic Styles and Dynamic CMOS
    • Pseudo Nmos Inverter
    • Dcvsl
    • Ptl
    • Dptl & Transmission Gate Logic
    • Dynamic Cmos Design
    • Speed And Power Considerations
    • Domino Logic And Its Derivatives
    • C2mos
    • Tspc Registers
    • Nora Cmos Course Project
  • Unit 5.0: Arithmetic Circuits and Memory Design
    • Circuit Design Considerations Of Arithmetic Circuits
    • Shifter
    • Cmos Memory Design Sram And Dram
  • Unit 6.0: BiCMOS Logic
    • Bicmos Logic Static And Dynamic Behaviour
    • Delay And Power Consumption In Bicmos Logic

Text/Reference Books:

  1. Principles of CMOS VLSI design: a system perspective by Neil H.E. Weste and Kamran Eshraghian; Addision Wesley pub.
  2. Digital integrated circuits by Demassa & Ciccone. Wiley pub.
  3. Modern VLSI Design system on silicon by Wayne Wolf: Addision Wesley Longman Publisher.
  4. Basic VLSI Design by Douglas A Pucknell & Kamran Eshranghian; PHI
  5. Digital Integrated Circuits: A Design Perspective by Jan M Rabaey; PHI

Professional Skill Development [100608]

  • Unit 1.0: Communication Skills
    • Public Speaking
    • Group Discussion
    • Gestures And Body Language & Professional Presentation Skills
  • Unit 2.0: Interpersonal Skills
    • Group Dynamics
    • Negotiation Skills
    • Leadership
    • Emotional Intelligence
  • Unit 3.0: Employability and Corporate Skills I
    • Time Management And Effective Planning
    • Stress Management
    • People Skills
    • Team Work
    • Development Of Leadership Qualities
  • Unit 4.0: Employability and Corporate Skills II
    • Decision Making And Negotiation Skills
    • Positive Attitude
    • Self-motivation
    • Professional Ethics
    • Business Etiquettes
    • Balancing Board Room
  • Unit 5.0: Business Writing and Interview Skills
    • Business Writing Skills
    • Resume Writing
    • Interview Skills
    • Technical Presentation
    • Guest Lecture
  • Unit 6.0: Professional Ethics and Entrepreneurship
    • Professional Ethics
    • Project Management
    • Entrepreneurship

Text/Reference Books:

  1. “Personality Development and Soft Skills”, Barun Mitra, Oxford University Press.
  2. “Managing Soft Skills for Personality Development”, B.N. Ghosh, McGraw Hill.
  3. “Communication Skills and Soft Skills: An Integrated Approach”, E. Suresh Kumar, Pearson
  4. “Communication to Win”, Richard Denny, Kogan Page India Pvt. Ltd.

Measurements and Instrumentation [110601]

  • Unit 1.0: Concepts Relating to Measurements
    • True Value
    • Accuracy
    • Precision
    • Resolution
    • Drift
    • Hysteresis
    • Dead-band
    • Sensitivity
  • Unit 2.0: Errors and Statistical Analysis
    • Errors In Measurements
    • Basic Statistical Analysis Applied To Measurements Mean
    • Standard Deviation
    • Six-sigma Estimation
    • Cp
    • Cpk
  • Unit 3.0: Sensors and Transducers
    • Sensors And Transducers For Physical Parameters Temperature
    • Pressure
    • Torque
    • Flow
    • Speed And Position Sensors
  • Unit 4.0: Current and Voltage Measurements
    • Current And Voltage Measurements
    • Shunts
    • Potential Dividers
    • Instrument Transformers
    • Hall Sensors
  • Unit 5.0: Measurements of R, L, C and Instruments
    • Measurements Of R
    • L And C
    • Digital Multi-meter
    • True Rms Meters
    • Clamp-on Meters
    • Meggers
    • Digital Storage Oscilloscope
  • Unit 6.0: Biomedical Instruments
    • Basic Components Of Bio-medical Instruments
    • Bio-electric Signals & Recording Electrodes
    • Transducers
    • Recording And Display Devices
    • Patient Care And Monitoring Systems
    • Cardiovascular Measurements Blood Pressure
    • Blood Flow
    • Cardiac Output
    • Heart Sounds Etc
    • Instrumentation For Respiratory And Nervous Systems
    • Analysis Of Eeg
    • Ecg
    • Emg
    • Eog And Action Potentials
    • Non- Invasive Diagnostic Measurements Temperature
    • Ultrasonic Diagnosis
    • Cat Scan Techniques
    • Sensory Measurements Motor Response

Text/Reference Books:

  1. “Measurement System, Application and Design”, E O Doeblin, TMH.
  2. “Course in Electrical and Electronic Measurement and Instrumentation”, A K Sawhney, Dhanpat Rai and Sons.
  3. “Electronic Measurements and Instrumentation”, Rajendra Prasad, Khanna Publishers
  4. “Basic Electrical Measurements”, M.B. Stout, Prentice Hall
  5. Sawhney A.K., A course in Electrical and Electronic Measurements & instrumentation, Dhanpat Rai.
  6. J. B. Gupta, A course in Electrical & Electronic Measurement & Instrumentation., S K Kataria & Sons.
  7. Kalsi H. S., Electronic Instrumentation, 3/e, Tata McGraw Hill, New Delhi, 2012
  8. S Tumanski, Principles of electrical measurement, Taylor & Francis.
  9. David A Bell, Electronic Instrumentation and Measurements,3/e, Oxford

Digital Signal Processing Lab [100606P]

Perform All Experiments

  • To Represent Basic Signals (Unit Step, Unit Impulse, Ramp, Exponential, Sine And Cosine)
  • To Develop Program For Discrete Convolution
  • To Develop Program For Discrete Correlation
  • To Understand Stability Test
  • To Understand Sampling Theorem
  • To Design Analog Filters (Low-pass, High Pass, Band Pass, Band Stop)
  • To Design Digital Filters (Low-pass, High Pass, Band Pass, Band Stop)
  • To Design Fir Filters Using Windows Techniques

Introduction to VLSI Design Lab [100607P]

Hands-on/Computer Experiments Related To The Course Contents Of Introduction To VLSI Design Theory

Power Systems-II Lab [103601P]

Lab Details As Per Department Guidelines

Electronics Design Laboratory [100609P]

Perform All Experiments

Students Will Demonstrate The Ability To

  • Understand The Practical Issues Related To Practical Implementation Of Applications Using Electronic Circuits
  • Choose Appropriate Components, Software And Hardware Platforms
  • Design A Printed Circuit Board, Get It Made And Populate/solder It With Components
  • Work As A Team With Other Students To Implement An Application

List of Experiments:

  • Basic Concepts On Measurements; Noise In Electronic Systems; Sensors And Signal Conditioning Circuits
  • Introduction To Electronic Instrumentation And Pc Based Data Acquisition; Electronic System Design, Analog System Design
  • Interfacing Of Analog And Digital Systems, Embedded Systems, Electronic System Design Employing Microcontrollers, Cplds, And Fpgas, Pcb Design And Layout; System Assembly Considerations
  • Group Projects Involving Electronic Hardware (Analog, Digital, Mixed Signal) Leading To Implementation Of An Application

Text/Reference Books:

  1. S. Sedra and K. C. Smith, “Microelectronic circuits”, Oxford University Press, 2007.
  2. P. Horowitz and W. Hill, “The Art of Electronics”, Cambridge University Press, 1997.
  3. H. W. Ott, “Noise Reduction Techniques in Electronic Systems”, Wiley, 1989.
  4. W.C. Bosshart, “Printed Circuit Boards: Design and Technology”, Tata McGraw Hill, 1983.
  5. G.L. Ginsberg, “Printed Circuit Design”, McGraw Hill, 1991.

Measurements and Instrumentation Lab [110601P]

  • Measurement Of A Batch Of Resistors And Estimating Statistical Parameters
  • Measurement Of L Using A Bridge Technique As Well As Lcr Meter
  • Measurement Of C Using A Bridge Technique As Well As Lcr Meter
  • Measurement Of Low Resistance Using Kelvins Double Bridge
  • Measurement Of High Resistance And Insulation Resistance Using Megger
  • Usage Of Dso For Steady State Periodic Waveforms Produced By A Function Generator
    • Selection Of Trigger Source And Trigger Level, Selection Of Time-scale And Voltage Scale
    • Bandwidth Of Measurement And Sampling Rate
  • Download Of One-cycle Data Of A Periodic Waveform From A Dso And Use Values To Compute The Rms Values Using A C Program
  • Usage Of Dso To Capture Transients Like A Step Change In R-l-c Circuit
  • Current Measurement Using Shunt, Ct, And Hall Sensor

Program Elective-I: Advanced Electric Drives [110602]

  • Unit 1.0: Power Converters for AC Drives
    • Pwm Control Of Inverter
    • Selected Harmonic Elimination
    • Space Vector Modulation
    • Current Control Of Vsi
    • Three Level Inverter
    • Different Topologies
    • Svm For 3 Level Inverter
    • Diode Rectifier With Boost Chopper
    • Pwm Converter As Line Side Rectifier
    • Current Fed Inverters With Self-commutated Devices
    • Control Of Csi
    • H Bridge As A 4-q Drive
  • Unit 2.0: Induction Motor Drives
    • Different Transformations And Reference Frame Theory
    • Modeling Of Induction Machines
    • Voltage Fed Inverter Control-v/f Control
    • Vector Control
    • Direct Torque And Flux Control (Dtc)
  • Unit 3.0: Synchronous Motor Drives
    • Modeling Of Synchronous Machines
    • Open Loop V/f Control
    • Vector Control
    • Direct Torque Control
    • Csi Fed Synchronous Motor Drives
  • Unit 4.0: Permanent Magnet Motor Drives
    • Introduction To Various Pm Motors
    • Bldc And Pmsm Drive Configuration
    • Comparison
    • Block Diagrams
    • Speed And Torque Control In Bldc And Pmsm
  • Unit 5.0: Switched Reluctance Motor Drives
    • Evolution Of Switched Reluctance Motors
    • Various Topologies For Srm Drives
    • Comparison
    • Closed Loop Speed And Torque Control Of Srm
  • Unit 6.0: DSP Based Motion Control
    • Use Of Dsps In Motion Control
    • Various Dsps Available
    • Realization Of Some Basic Blocks In Dsp For Implementation Of Dsp Based Motion Control

Text/Reference Books:

  1. B. K. Bose, “Modern Power Electronics and AC Drives”, Pearson Education, Asia, 2003.
  2. P.C. Krause, O. Wasynczuk and S.D. Sudhoff, “Analysis of Electric Machinery and Drive Systems”, John Wiley & Sons, 2013.
  3. H. A. Taliyat and S. G. Campbell, “DSP based Electromechanical Motion Control”, CRC press, 2003.
  4. R. Krishnan, “Permanent Magnet Synchronous and Brushless DC motor Drives”, CRC Press, 2009.

Program Elective-I: Electrical Energy Conservation and Auditing [110608]

  • Unit 1.0: Energy Scenario
    • Commercial And Non-commercial Energy
    • Primary Energy Resources
    • Commercial Energy Production
    • Final Energy Consumption
    • Energy Needs Of Growing Economy
    • Long Term Energy Scenario
    • Energy Pricing
    • Energy Sector Reforms
    • Energy And Environment
    • Energy Security
    • Energy Conservation And Its Importance
    • Restructuring Of The Energy Supply Sector
    • Energy Strategy For The Future
    • Air Pollution
    • Climate Change
    • Energy Conservation Act-2001 And Its Features
  • Unit 2.0: Basics of Energy and its Various Forms
    • Electricity Tariff
    • Load Management And Maximum Demand Control
    • Power Factor Improvement
    • Selection & Location Of Capacitors
    • Thermal Basics-fuels
    • Thermal Energy Contents Of Fuel
    • Temperature & Pressure
    • Heat Capacity
    • Sensible And Latent Heat
    • Evaporation
    • Condensation
    • Steam
    • Moist Air And Humidity & Heat Transfer
    • Units And Conversion
  • Unit 3.0: Energy Management & Audit
    • Definition
    • Energy Audit
    • Need
    • Types Of Energy Audit
    • Energy Management (audit) Approach-understanding Energy Costs
    • Bench Marking
    • Energy Performance
    • Matching Energy Use To Requirement
    • Maximizing System Efficiencies
    • Optimizing The Input Energy Requirements
    • Fuel & Energy Substitution
    • Energy Audit Instruments
    • Material And Energy Balance Facility As An Energy System
    • Methods For Preparing Process Flow
    • Material And Energy Balance Diagrams
  • Unit 4.0: Energy Efficiency in Electrical Systems
    • Electrical System Electricity Billing
    • Electrical Load Management And Maximum Demand Control
    • Power Factor Improvement And Its Benefit
    • Selection And Location Of Capacitors
    • Performance Assessment Of Pf Capacitors
    • Distribution And Transformer Losses
    • Electric Motors Types
    • Losses In Induction Motors
    • Motor Efficiency
    • Factors Affecting Motor Performance
    • Rewinding And Motor Replacement Issues
    • Energy Saving Opportunities With Energy Efficient Motors
  • Unit 5.0: Energy Efficiency in Industrial Systems
    • Compressed Air System Types Of Air Compressors
    • Compressor Efficiency
    • Efficient Compressor Operation
    • Compressed Air System Components
    • Capacity Assessment
    • Leakage Test
    • Factors Affecting The Performance And Savings Opportunities In Hvac
    • Fans And Blowers Types
    • Performance Evaluation
    • Efficient System Operation
    • Flow Control Strategies And Energy Conservation Opportunities
    • Pumps And Pumping System Types
    • Performance Evaluation
    • Efficient System Operation
    • Flow Control Strategies And Energy Conservation Opportunities
    • Cooling Tower Types And Performance Evaluation
    • Efficient System Operation
    • Flow Control Strategies And Energy Saving Opportunities
    • Assessment Of Cooling Towers
  • Unit 6.0: Energy Efficient Technologies in Electrical Systems
    • Maximum Demand Controllers
    • Automatic Power Factor Controllers
    • Energy Efficient Motors
    • Soft Starters With Energy Saver
    • Variable Speed Drives
    • Energy Efficient Transformers
    • Electronic Ballast
    • Occupancy Sensors
    • Energy Efficient Lighting Controls
    • Energy Saving Potential Of Each Technology

Text/Reference Books:

  1. Guide books for National Certification Examination for Energy Manager / Energy Auditors Book-1, General Aspects (available online)
  2. Guide books for National Certification Examination for Energy Manager / Energy Auditors Book-3, Electrical Utilities (available online)
  3. S. C. Tripathy, “Utilization of Electrical Energy and Conservation”, McGraw Hill,1991.
  4. Success stories of Energy Conservation by BEE, New Delhi (www.bee-india.org)

Program Elective-I: Computer Architecture [100611]

  • Unit 1.0: Introduction to Computer Organization
    • Architecture And Function Of General Computer System
    • Cisc Vs Risc
    • Data Types
    • Integer Arithmetic Multiplication
    • Division
    • Fixed And Floating Point Representation And Arithmetic
    • Control Unit Operation
    • Hardware Implementation Of Cpu With Micro Instruction
    • Microprogramming
    • System Buses
    • Multi-bus Organization
  • Unit 2.0: Memory Organization
    • System Memory
    • Cache Memory Types And Organization
    • Virtual Memory And Its Implementation
    • Memory Management Unit
    • Magnetic Hard Disks
    • Optical Disks
  • Unit 3.0: Input – Output Organization
    • Accessing I/o Devices
    • Direct Memory Access And Dma Controller
    • Interrupts And Interrupt Controllers
    • Arbitration
    • Multilevel Bus Architecture
    • Interface Circuits Parallel And Serial Port
    • Features Of Pci And Pci Express Bus
  • Unit 4.0: 16 and 32 Microprocessors
    • 80x86 Architecture
    • Ia 32 And Ia 64
    • Programming Model
    • Concurrent Operation Of Eu And Biu
    • Real Mode Addressing
    • Segmentation
    • Addressing Modes Of 80x86
    • Instruction Set Of 80x86
    • I/o Addressing In 80x86
  • Unit 5.0: Pipelining
    • Introduction To Pipelining
    • Instruction Level Pipelining (Ilp)
    • Compiler Techniques For Ilp
    • Data Hazards
    • Dynamic Scheduling
    • Dependability
    • Branch Cost
    • Branch Prediction
    • Influence On Instruction Set
  • Unit 6.0: Different Architectures
    • Vliw Architecture
    • Dsp Architecture
    • Soc Architecture
    • Mips Processor And Programming

Text/Reference Books:

  1. V. Carl, G. Zvonko and S. G. Zaky, “Computer organization”, McGraw Hill, 1978.
  2. B. Brey and C. R. Sarma, “The Intel microprocessors”, Pearson Education, 2000.
  3. J. L. Hennessy and D. A. Patterson, “Computer Architecture A Quantitative Approach”, Morgan Kauffman, 2011.
  4. W. Stallings, “Computer organization”, PHI, 1987.
  5. P. Barry and P. Crowley, “Modern Embedded Computing”, Morgan Kaufmann, 2012.
  6. N. Mathivanan, “Microprocessors, PC Hardware and Interfacing”, Prentice Hall, 2004.
  7. Y. C. Lieu and G. A. Gibson, “Microcomputer Systems: The 8086/8088 Family”, Prentice Hall India, 1986.
  8. J. Uffenbeck, “The 8086/8088 Design, Programming, Interfacing”, Prentice Hall, 1987.
  9. B. Govindarajalu, “IBM PC and Clones”, Tata McGraw Hill, 1991.
  10. P. Able, “8086 Assembly Language Programming”, Prentice Hall India.

Program Elective-I: Digital Image & Video Processing [100614]

  • Unit 1.0: Digital Image Fundamentals
    • Elements Of Visual Perception
    • Image Sensing And Acquisition
    • Image Sampling And Quantization
    • Basic Relationships Between Pixels-neighbourhood
    • Adjacency
    • Connectivity
    • Distance Measures
  • Unit 2.0: Image Enhancements and Filtering
    • Gray Level Transformations
    • Histogram Equalization And Specifications
    • Pixel-domain Smoothing Filters Linear And Order-statistics
    • Pixel-domain Sharpening Filters First And Second Derivative
    • Two-dimensional Dft And Its Inverse
    • Frequency Domain Filters Low-pass And High-pass
  • Unit 3.0: Color Image Processing
    • Color Models Rgb
    • Yuv
    • Hsi
    • Color Transformations Formulation
    • Color Complements
    • Color Slicing
    • Tone And Color Corrections
    • Color Image Smoothing And Sharpening
    • Color Segmentation
  • Unit 4.0: Image Segmentation
    • Detection Of Discontinuities
    • Edge Linking And Boundary Detection
    • Thresholding Global And Adaptive
    • Region-based Segmentation
  • Unit 5.0: Wavelets and Multi-resolution Image Processing
    • Uncertainty Principles Of Fourier Transform
    • Time Frequency Localization
    • Continuous Wavelet Transforms
    • Wavelet Bases And Multi-resolution Analysis
    • Wavelets And Subb And Filter Banks
    • Wavelet Packets
    • Image Compression Redundancy Inter Pixel And Psycho-visual
    • Loss Less Compression Predictive
    • Entropy
    • Lossy Compression Predictive And Transform Coding
    • Discrete Cosine Transform
    • Still Image Compression Standards Jpeg And Jpeg-2000
  • Unit 6.0: Fundamentals of Video Coding
    • Inter-frame Redundancy
    • Motion Estimation Techniques Full-search
    • Fast Search Strategies
    • Forward And Backward Motion Prediction
    • Frame Classification I
    • P And B
    • Video Sequence Hierarchy Group Of Pictures
    • Frames
    • Slices
    • Macro-blocks And Blocks
    • Elements Of A Video Encoder And Decoder
    • Video Coding Standards Mpeg And H.26x
    • Video Segmentation Temporal Segmentation Shot Boundary Detection
    • Hard-cuts And Soft-cuts
    • Spatial Segmentation Motion-based
    • Video Object Detection And Tracking

Text/Reference Books:

  1. R.C. Gonzalez and R.E. Woods, Digital Image Processing, Second Edition, Pearson Education 3rd edition 2008
  2. Anil Kumar Jain, Fundamentals of Digital Image Processing, Prentice Hall of India.2nd edition 2004
  3. Murat Tekalp, Digital Video Processing” Prentice Hall, 2nd edition 2015.

Program Elective-II: Computational Electromagnetics [110603]

  • Unit 1.0: Introduction
    • Conventional Design Methodology
    • Computer Aided Design Aspects Advantages
    • Review Of Basic Fundamentals Of Electrostatics And Electromagnetics
    • Development Of Helmhotz Equation
    • Energy Transformer Vectors Poynting And Slepian
    • Magnetic Diffusion-transients And Time-harmonic
  • Unit 2.0: Analytical Methods
    • Analytical Methods Of Solving Field Equations
    • Method Of Separation Of Variables
    • Roths Method
    • Integral Methods Greens Function
    • Method Of Images
  • Unit 3.0: Finite Difference Method (FDM)
    • Finite Difference Schemes
    • Treatment Of Irregular Boundaries
    • Accuracy And Stability Of Fd Solutions
    • Finite-difference Time-domain (Fdtd) Method Uniqueness And Convergence
  • Unit 4.0: Finite Element Method (FEM)
    • Overview Of Fem
    • Variational And Galerkin Methods
    • Shape Functions
    • Lower And Higher Order Elements
    • Vector Elements
    • 2d And 3d Finite Elements
    • Efficient Finite Element Computations
  • Unit 5.0: Special Topics
    • Background Of Experimental Methods Electrolytic Tank
    • R-c Network Solution
    • Field Plotting (graphical Method)
    • Hybrid Methods
    • Coupled Circuit Field Computations
    • Electromagnetic Thermal And Electromagnetic Structural Coupled Computations
    • Solution Of Equations
    • Method Of Moments
    • Poissons Fields
  • Unit 6.0: Applications
    • Low Frequency Electrical Devices
    • Static/time-harmonic/transient Problems In Transformers
    • Rotating Machines
    • Actuators
    • Cad Packages

Text/Reference Books:

  1. P. P. Silvester and R. L. Ferrari “Finite Element for Electrical Engineers”, Cambridge University press, 1996.
  2. M. N. O. Sadiku, “Numerical Techniques in Electromagnetics”, CRC press, 2001.

Program Elective-II: Electrical Machine Design [110609]

  • Unit 1.0: Introduction
    • Major Consideration Sin Electrical Machine Design
    • Electrical Engineering Materials
    • Space Factor
    • Choice Of Specific Electrical And Magnetic Loadings
    • Thermal Considerations
    • Heat Flow
    • Temperature Rise
    • Rating Of Machines
  • Unit 2.0: Transformers
    • Sizing Of A Transformer
    • Main Dimensions
    • Kva Output For Single- And Three-phase Transformers
    • Window Space Factor
    • Overall Dimensions
    • Operating Characteristics
    • Regulation
    • No Load Current
    • Temperature Rise In Transformers
    • Design Of Cooling Tank
    • Methods For Cooling Of Transformers
  • Unit 3.0: Induction Motors
    • Sizing Of An Induction Motor
    • Main Dimensions
    • Length Of Air Gap
    • Rules For Selecting Rotor Slots Of Squirrel Cage Machines
    • Design Of Rotor Bars & Slots
    • Design Of End Rings
    • Design Of Wound Rotor
    • Magnetic Leakage Calculations
    • Leakage Reactance Of Polyphase Machines
    • Magnetizing Current
    • Short Circuit Current
    • Circle Diagram
    • Operating Characteristics
  • Unit 4.0: Synchronous Machines
    • Sizing Of Asynchronous Machine
    • Main Dimensions
    • Design Of Salient Pole Machines
    • Short Circuit Ratio
    • Shape Of Pole Face
    • Armature Design
    • Armature Parameters
    • Estimation Of Air Gap Length
    • Design Of Rotor
    • Design Of Damper Winding
    • Determination Of Full Load Field Mmf
    • Design Of Field Winding
    • Design Of Turbo Alternators
    • Rotor Design
  • Unit 5.0: Computer Aided Design (CAD) I
    • Limitations (assumptions) Of Traditional Designs
    • Need For Cad Analysis
    • Synthesis And Hybrid Methods
    • Design Optimization Methods
    • Variables
    • Constraints And Objective Function
    • Problem Formulation
  • Unit 6.0: Computer Aided Design (CAD) II
    • Introduction To Fem Based Machine Design
    • Introduction To Complex Structures Of Modern Machines Pmsms
    • Bldcs
    • Srm And Claw-pole Machines

Text/Reference Books:

  1. A. K. Sawhney, “A Course in Electrical Machine Design”, Dhanpat Rai and Sons, 1970.
  2. M.G. Say, “Theory & Performance & Design of A.C. Machines”, ELBS London.
  3. S. K. Sen, “Principles of Electrical Machine Design with computer programmes”, Oxford and IBH Publishing, 2006.
  4. K. L. Narang, “A Text Book of Electrical Engineering Drawings”, Satya Prakashan, 1969.
  5. A. Shansugasundaram, G. Gangadharan and R. Palani, “Electrical Machine Design Data Book”, New Age International, 1979.
  6. K. M. V. Murthy, “Computer Aided Design of Electrical Machines”, B.S. Publications, 2008.
  7. Electrical machines and equipment design exercise examples using Ansoft’s Maxwell 2D machine design package.

Program Elective-II: Digital Control Systems [100612]

  • Unit 1.0: Discrete Representation of Continuous Systems
    • Basics Of Digital Control Systems
    • Discrete Representation Of Continuous Systems
    • Sample And Hold Circuit
    • Mathematical Modelling Of Sample And Hold Circuit
    • Effects Of Sampling And Quantization
    • Choice Of Sampling Frequency
    • Zoh Equivalent
  • Unit 2.0: Discrete System Analysis
    • Z-Transform And Inverse Z Transform For Analyzing Discrete Time Systems
    • Pulse Transfer Function
    • Pulse Transfer Function Of Closed Loop Systems
    • Mapping From S-plane To Z Plane
    • Solution Of Discrete Time Systems
    • Time Response Of Discrete Time System
  • Unit 3.0: Stability of Discrete Time System
    • Stability Analysis By Jury Test
    • Stability Analysis Using Bilinear Transformation
    • Design Of Digital Control System With Dead Beat Response
    • Practical Issues With Dead Beat Response Design
  • Unit 4.0: State Space Approach for Discrete Time Systems
    • State Space Models Of Discrete Systems
    • State Space Analysis
    • Lyapunov Stability
    • Controllability
    • Reach-ability
    • Reconstructibility And Observability Analysis
    • Effect Of Pole Zero Cancellation On The Controllability & Observability
  • Unit 5.0: Design of Digital Control System
    • Design Of Discrete Pid Controller
    • Design Of Discrete State Feedback Controller
    • Design Of Set Point Tracker
    • Design Of Discrete Observer For Lti System
    • Design Of Discrete Compensator
  • Unit 6.0: Discrete Output Feedback Control
    • Design Of Discrete Output Feedback Control
    • Fast Output Sampling (Fos) And Periodic Output Feedback Controller Design For Discrete Time Systems

Text/Reference Books:

  1. K. Ogata, “Digital Control Engineering”, Prentice Hall, Englewood Cliffs, 1995.
  2. M. Gopal, “Digital Control Engineering”, Wiley Eastern, 1988.
  3. G. F. Franklin, J. D. Powell and M. L. Workman, “Digital Control of Dynamic Systems”, Addison-Wesley, 1998.
  4. B.C. Kuo, “Digital Control System”, Holt, Rinehart and Winston, 1980.

Program Elective-II: Electrical Drives [100613]

  • Unit 1.0: DC Motor Characteristics
    • Review Of Emf And Torque Equations Of Dc Machine
    • Review Of Torque-speed Characteristics Of Separately Excited Dc Motor
    • Change Into Rque-speed Curve With Armature Voltage
    • Example Load Torque Speed Characteristics
    • Operating Point
    • Armature Voltage Control For Varying Motor Speed
    • Flux Weakening For High Speed Operation
  • Unit 2.0: Chopper Fed DC Drive
    • Review Of Dc Chopper And Duty Ratio Control
    • Chopper Fed Dc Motor For Speed Control
    • Steady State Operation Of A Chopper Fed Drive
    • Armature Current Waveform And Ripple
    • Calculation Of Losses In Dc Motor And Chopper
    • Efficiency Of Dc Drive
    • Smooth Starting
  • Unit 3.0: Multi-quadrant DC Drive
    • Review Of Motoring And Generating Modes Operation Of A Separately Excited Dc Machine
    • Four Quadrant Operation Of Dc Machine
    • Single-quadrant
    • Two-quadrant And Four-quadrant Choppers
    • Steady-state Operation Of Multi-quadrant Chopper Fed Dc Drive
    • Regenerative Braking
  • Unit 4.0: Closed-loop Control of DC Drive
    • Control Structure Of Dc Drive
    • Inner Current Loop And Outer Speed Loop
    • Dynamic Model Of Dc Motor Dynamic Equations And Transfer Functions
    • Modeling Of Chopper As Gain With Switching Delay
    • Plant Transfer Function
    • For Controller Design
    • Current Controller Specification And Design
    • Speed Controller Specification And Design
  • Unit 5.0: Induction Motor Characteristics
    • Review Of Induction Motor Equivalent Circuit And Torque-speed Characteristic
    • Variation Of Torque Speed Curve With (i) Applied Voltage
    • (ii) Applied Frequency And (iii) Applied Voltage And Frequency
    • Typical Torque-speed Curves Of Fan And Pump Loads
    • Operating Point
    • Constant Flux Operation
    • Flux Weakening Operation
  • Unit 6.0: Scalar Control and Slip Ring Induction Motor Control
    • Review Of Three-phase Voltage Source Inverter
    • Generation Of Three-phase Pwm Signals
    • Sinusoidal Modulation
    • Space Vector Theory
    • Conventional Space Vector Modulation
    • Constant V/f Control Of Induction Motor
    • Steady-state Performance Analysis Based On Equivalent Circuit
    • Speed Drop With Loading
    • Slip Regulation
    • Impact Of Rotor Resistance Of The Induction Motor Torque-speed Curve
    • Operation Of Slip-ring Induction Motor With External Rotor Resistance
    • Starting Torque
    • Power Electronic Based Rotor Side Control Of Slip Ring Motor
    • Slip Power Recovery

Text/Reference Books:

  1. G. K. Dubey, “Power Semiconductor Controlled Drives”, Prentice Hall,1989.
  2. R. Krishnan, “Electric Motor Drives: Modeling, Analysis and Control”, Prentice Hall, 2001.
  3. G. K. Dubey, “Fundamentals of Electrical Drives”, CRC Press, 2002.
  4. W. Leonhard, “Control of Electric Drives”, Springer Science & Business Media, 2001.
← BEU PYQ Home